11
Batteries
IMPORTANT: Always use ALKALINE batteries only.
Do not use so-called heavy duty batteries.
Always remove the batteries for prolonged storage.
CHECK THE BATTERIES if your detector
exhibits any of the following symptoms:
1. The unit does not turn on.
2. Low speaker volume.
3. Unit beeps continuously or erratically.
The LCD screen shows battery
condition on the lower left.
If the dial indicates "R", replace the batteries. If the dial
indicates "L", the batteries are low and may go dead quickly, so you
may want to replace them. When you replace batteries, replace both
at the same time.
TIP: Battery life is typically about 20 hours, or a little longer if
you use headphones.
▲ Follow these steps to install the batteries.
1. Carefully remove the battery compartment door by pressing the
release clip on the right side of the door.
2. Snap one battery onto each of the terminals and place the batter-
ies inside the compartment. Insert both of the batteries with
terminals facing outward.
3, Replace the compartment door by carefully inserting opposite
side of clip first. Then press down on clip side until battery door
snaps into place.
Release
Clip
Alkaline Batteries
Release Clip of
Battery Door
Comentarios a estos manuales