Bounty Hunter Time Ranger El manual del propietario descargar pdf (Pagina 5)

If you want to get started quickly, do the following.

1. Assemble the detector (see instructions on page 10).

2. Install two alkaline 9-volt batteries (see instructions on page 11).

3. Press the Power ON/OFF button. The machine should turn on,

giving several beeps and turning on the LCD screen.

4. When first turned on, the Time Ranger™ starts out in preset

Program #1. This is a "motion discrimination & target ID mode"

with iron and foil rejected. This means that the searchcoil has to

be in motion over a metal object to detect it, and that the

machine will ignore objects which it has decided are probably

iron or foil. .....Sensitivity starts out at medium, which is the

most a beginner should use.

5. If the searchcoil is not in motion and not close to metal, the

detector should be silent. If you experience false signals from

electrical interference, from the soil itself, or from lots of trash

metal, press the Sensitivity minus button to reduce sensitivity.

This will usually make the unwanted signals go away.

6. Toss a coin on the ground and sweep back and forth over it a few

times to get a feel for how the machine responds.

7. You are now ready to search for nonferrous metals such as coins,

to a depth of 6-8 inches under most conditions.

8. The All Metals Pinpoint mode makes recovering a target much

easier. See page 23 for details. Learn to use it at first without

Smart Trac ground balancing.

QUICK START (if you're really impatient)

1 2 3 4 5 6 7 8 9 10 ... 40 41

Sin comentarios

Bounty Hunter Time Ranger El manual del propietario Pagina 5